About Us

Trijet Limited is an engineering consulting firm specialising in the field of inkjet printing and coating.   We have been consulting clients since 2011 mainly in Europe, America and Asia providing bespoke solution in all aspects of inkjet printing and coatings.

We believe in maintaining a positive mindset, creating partnerships with a purpose, and always striving for significant outcomes. When you work with us, you should expect a collaboration with transparency and consistency.


TriPav 2.0

The high frequency rheometer TriPAV is a squeeze-flow rheometer where a small quantity of fluid is held between two flat plates and one of the plates is oscillated by a piezo actuator.

TriPAV is the only rheometer that can measure the complex viscosity from 1 Hz to 10,000 Hz, closer to the pulse width in a PH channel.

The high frequency Rheology of fluids is measured at conditions that mimic those experienced in Print head channels.

The entire measurements is very quick and is ready in less than a few minutes 


The Trimaster is a new high speed filament stretching device.

The Trimaster can be used for both extensional viscosity and filament break-up behaviour for low viscosity fluid.

Can be followed optically for viscoelastic fluids with shear viscosities as low as 10 mPa.s.